Tuesday, January 11, 2005


The jig I made according to the instructions didn't work out so well so I just used some metal blocks to make sure it was square.  Posted by Hello

Here is the epoxied bearing - I must say, the stuff stinks! Posted by Hello

Tonight I am going to epoxy the rudder bearings to the hull. I realized that when I tried to fit the rudder shaft into the bearing into the shaft, it didn't fit. I drilled it out from 4mm to 4.1mm. I hope the water won't enter the hull but I guess I will have to use some silicone grease.  Posted by Hello